|Place of Origin:||China|
|Delivery Time:||15 work days|
|Payment Terms:||T/T, Credit Card|
|Supply Ability:||5000 pcs/month|
High Sensitivity Geophone 5Hz Sensor Horizontal EG-5-HS-I
High Sensitivity Geophone 5Hz (EG-5-HS-I) is used to receive the weak deep and low frequency signal. This kind of geophone has following characters: Low frequency, Low distortion and high sensitivity. It’s suitable for field single point data acquisition.
It is a long coil travel version geophone with high sensivitivy of 80.0V/m/s. The extra coil travel offers an advantage for higher tilt requirements and where larger amplitude signals may be encountered, for example, in industrial vibration monitoring.
It’s suitable for field single point data acquisition.
It can be used as single point and also 3- component.
|Natural Frequency ( Hz )||5Hz ± 7.5%|
|Typical spurious frequency (Hz)||≥130Hz|
|Opening Circuit Damping||0.6 ± 7.5%|
|Open circuit resistance (ohm)||1850 ± 5%|
|Opening Circuit Intrinsic Voltage Sensitivity (V/m/s)||80 ± 5%|
|Moving Mass ( g )||22.8g|
|Max. Motion mm(p-p)||3mm|
|Diameter ( mm )||32mm|
|Height ( mm )||44mm|
|Weight ( g )||166g|
|Operating Temperature Range ( ℃ )||-40℃ to +80℃|
|Warranty Period||1 years|
All parameters specified here in are rated at a temperature 20℃±2℃ .